Contact: +91 33 2442 9639
Laying Instruction
  • Set the floor level with wet sand for 50mm thickness and compact by using Vibrating Plate Compactor
  • Keep the sand with moisture content Do not use sand which is 100% dry
  • Do not spread the sand for larger areas as it will dry out and reduce the performance
  • Use sand of 50mm shredded properly
  • Lay the Interlocking paver in compacted sand floor and tap gently with a rubber mallet to get perfect joints
  • Spread river sand on the laid area to fill the joint gaps and run the Vibrating plate Compactor to get the perfect level. Construct retention wall all around the laid areas to arrest the movement of Paver blocks
  • It is recommended to provide the slope of3 inch on the wider side and 2 inches on the linear side for every 10 feet of the laying area.



Lists of valued

• Kolkata Municipal Corporation
• South Eastern Railways
• Metro Railways
• Shapoorji and Pallonji

Read More
Anjali Tiles are
manufactured using

• High quality white cement
• Rich concrete mix
• UV stabilised imported pigments
• As per IS 1237— 1280 Standards

Read More